Made-to-measure PVC windows, built one at a time to the dimensions you give us. There are no standard sizes here and no stock: each window leaves the factory designed for one specific opening, with the glazing, colour and hardware it calls for.
Made-to-measure PVC windows
PVC windows made to measure with VEKA, WDS and EKIPAZH profiles from 60 to 82 mm deep, 3 to 7 chambers, glazing units from 24 to 52 mm and Axor or Winkhaus hardware. Each window is configured online to the exact size of the opening and delivered in 15–30 working days, with delivery across mainland Spain.
6 modelsin Windows
By popularity
v_veka_70Window PVC VEKA 70
- Number of cameras
- 5
- Mounting width
- 70
- Glass unit width
- 24, 40
- Lamination capability
- Yes
- Hardware
- Axor, WinkHous
from55,00€
v_veka_82Window PVC VEKA 82
- Number of cameras
- 6
- Mounting width
- 82
- Glass unit width
- 44, 52
- Lamination capability
- Yes
- Hardware
- WinkHous
from75,00€
v_ultra_72Window PVC EKIPAZH ULTRA 72
- Number of cameras
- 5
- Mounting width
- 72
- Lamination capability
- No
from50,00€
v_ultra_60Window PVC EKIPAZH ULTRA 60
- Number of cameras
- 3
- Mounting width
- 60
- Glass unit width
- Up to 32
- Lamination capability
- Yes
- Hardware
- Axor, WinkHous
from44,00€
v_wds_76_adWindow PVC WDS 76 AD
- Number of cameras
- 5
- Mounting width
- 76
- Glass unit width
- Up to 48
- Lamination capability
- Yes
- Hardware
- Axor, WinkHous
from54,00€
v_wds_76_mdWindow PVC WDS 76 MD
- Number of cameras
- 6
- Mounting width
- 76
- Glass unit width
- Up to 48
- Lamination capability
- Yes
- Hardware
- Axor, WinkHous
from58,00€
- profile systems from VEKA, WDS and EKIPAZH
- 6
- profile depth
- 60–82mm
- production and delivery across mainland Spain
- 3–4weeks
- warranty against manufacturing defects
- 3years
Which profile to choose
It is the question that comes up most. The short answer: for most flats in mild climates, a 70–72 mm profile with five chambers is more than enough.
- Flat on the coast or in a mild climate70–72 mm
VEKA 70 · EKIPAZH ULTRA 72
Five chambers and a Uf of around 1.3 W/m²K. Neither is a "basic" profile; you simply aren't paying for insulation that on the Mediterranean coast rarely gets used.
See VEKA 70 - Inland, mountains, long winters76–82 mm
WDS 76 AD / MD · VEKA 82
WDS 76 takes glazing up to 48 mm; the MD adds a sixth chamber, a third seal and class C5 wind resistance. At the top sits VEKA 82: triple seal, Uf from 1.1 W/m²K and 52 mm triple glazing, the profile for the Passive House standard.
See VEKA 82 - Terrace, loggia, porch or sunroom60 mm
EKIPAZH ULTRA 60
Three chambers. Not one for the master bedroom, but it closes off a terrace or separates a sunroom from the living room without overspending.
See ULTRA 60
One detail they all share: steel reinforcement inside (U-shaped, L-shaped or closed, depending on the model) and two or three seal contours, so none of them lacks rigidity at normal sizes.
The six systems side by side
| System | Profile | Uf, W/m²K | Best for |
|---|---|---|---|
| EKIPAZH ULTRA 60 | 60 mm · 3 chambers | from 1.59 | Terraces, loggias, porches and sunrooms |
| VEKA 70 | 70 mm · 5 chambers | from 1.3 | Flats on the coast and in mild climates |
| EKIPAZH ULTRA 72 | 72 mm · 5 chambers | from 1.3 | Flats in mild climates |
| WDS 76 AD | 76 mm · 5 chambers | from 1.3 | Inland homes, glazing up to 48 mm |
| WDS 76 MD | 76 mm · 6 chambers | from 1.3 | Windy sites (class C5), three seals |
| VEKA 82 | 82 mm · 6 chambers | from 1.1 | Mountains, 52 mm triple glazing, Passive House |
Glass, opening and colour
Glass
The profile sets the ceiling, but the glass decides much of the comfort. A 24 mm double-glazed unit is fine for a quiet inward-facing flat; at 40–44 mm with a low-emissivity coating the difference in heating and traffic noise starts to show. For ground floors and noisy streets, the WDS 76 takes 6 to 8 mm laminated glass.
Opening and hardware
Axor or Winkhaus hardware, both with multipoint locking and fine adjustment of the sash. Tilt-and-turn remains the most practical opening: it swings fully open for cleaning and tilts to ventilate without draughts. The trickle-vent position deals with condensation on winter mornings.
Colour
White is still the standard, but it stopped being the only option a long time ago: there are woodgrain finishes and current matts such as Antracita. The laminate can go on both faces or only on the outside, when the façade calls for anthracite and the inside is white. It doesn't fade in the sun and never needs varnishing.
If the façade gets a lot of sun
Ask for low-emissivity glass with solar control: glass that holds heat in during winter but lets the whole of July's sun straight through turns the living room into a greenhouse.
PVC or aluminium?
Where PVC wins
- With the same glass, it insulates better than aluminium with a thermal break
- Less condensation on the frame and less spent on heating
- Doesn't corrode in salt air and never needs painting
- Passes the 30-year mark with water, mild soap and a drop of lubricant on the hardware
Where it has its limits
- Very large sashes with very slim profiles are still aluminium territory
- The same goes for anodised metallic finishes
- Residents' associations and listed buildings may fix the material or colour: check before ordering
Measuring, configuring and receiving the window
Measure the opening
Width and height of the opening at three points each, and you keep the smallest value. If it is going into bare masonry, take off 10–15 mm per side for fitting clearance and foam; if you are replacing an old frame, measure the inside clear width of the existing sub-frame.
Configure
In the configurator you pick dimensions, profile system, glass, colour and hardware, and the price including VAT updates on the spot. There is no per-square-metre rate; the amount depends on the specific combination.
Production and delivery
Production starts once the order is confirmed and the window arrives in 3–4 weeks, shipped anywhere in mainland Spain and packed for long-distance transport.
Payment and warranty
Payment is online by card, Google Pay, Apple Pay, Bizum or bank transfer. Every system carries a three-year warranty against manufacturing defects.
The most expensive mistake to put right
Before confirming, check the opening direction and the hinge side looking at the window from inside. And for very wide openings, better 76 or 82 mm with closed reinforcement.
Doubts about the measurements or the profile?
Better to ask before production starts than after.